Aladdin Oil Lamps Instructions for Assembling your Aladdin Oil Lamp
PLEASE READ THESE INSTRUCTIONS CAREFULLY.
Carefully unwrap all parts of your oil lamp.
IF YOUR OIL LAMP IS EQUIPPED WITH A SHADE AND TRIPOD (SHADE HOLDER) PLEASE
NOTE THAT TRIPOD ATTACHES TO LAMP BETWEEN BURNER AND BOWL. (Fig. 1)
Screw burner into bowl by turning it clockwise.
Remove LOX-ON? mantle from box by handling the wire
frame. (Fig. 2) Do not touch mantle fabric. Fit mantle to burner
gallery--the upper detachable part of the burner which also holds the
chimney when assembled. (Fig. 3) Lock mantle into place by turning it
clockwise.
Insert LOX-ON? chimney into gallery (Fig. 4) and
secure in place by gently turning clockwise. The chimney should fit
snugly, but take care not to break the chimney by over tightening. IF YOU
HAVE TROUBLE FITTING THE CHIMNEY INTO THE GALLERY, YOU MAY NEED TO BEND
THE METAL TABS ON THE GALLERY OUTWARD SLIGHTLY.
Place shade on tripod arms. (Fig. 5) If shade fits too tightly bend
arms of tripod down slightly to accommodate shade.
IF YOUR OIL LAMP IS EQUIPPED WITH AN ELECTRIC CONVERTER and you wish to
use the electric converter, follow the same instructions for assembly as
those for the kerosene burner (Steps 2 and 3). Then screw in the light
bulb you have chosen (we suggest you use a 60 watt bulb in your electric
converter). Insert the chimney as described in step 5 above. The tripod
will fit between the converter and bowl in the same manner as described
above for the kerosene burner.
